PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SR1-5WK35
SR1-5WK35 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.0937 INCHES NOMINAL IN, overall_width: 0.1094 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-585-3448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SR1-5WK35
NSN: 3110-00-585-3448
FSC: 3110
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
bore_diameter0.0937 INCHES NOMINAL IN
overall_width0.1094 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
special_featuresTORQUE TESTED,1100 MG MM MAX STARTING TORQUE UNDER A 75 GM THRUST LOAD
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
overall_outside_diameter0.3125 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-00-585-3448
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SR1-5WK35 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
BORE DIAMETER: 0.0937 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL CORROSION RESISTING OVERALL
BORE DIAMETER0.0937 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
OVERALL WIDTH0.1094 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
INTERNAL CLEARANCE0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
SPECIAL FEATURESTORQUE TESTED,1100 MG MM MAX STARTING TORQUE UNDER A 75 GM THRUST LOAD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
177030-106Interchangeable
interchangeable cross-reference
interchangeable
1577Interchangeable
interchangeable cross-reference
interchangeable
MIL-B-81793CInterchangeable
interchangeable cross-reference
interchangeable
R3DS5172Interchangeable
interchangeable cross-reference
interchangeable
SSRS77R3DZC1826E3Interchangeable
interchangeable cross-reference
interchangeable
MMS1K7DFInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SR1-5WK35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SR1-5WK35?
SR1-5WK35 is a BEARING,BALL,ANNULAR.
What parts can replace SR1-5WK35?
There are 29 known substitutes for SR1-5WK35: 177030-106, 1577, MIL-B-81793C and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SR1-5WK35?
SR1-5WK35 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-585-3448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SR1-5WK35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026