PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 177030-106
177030-106 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.2185 INCHES MINIMUM AND 0.2187 INCHES MAXIMUM IN, overall_width: 0.1084 INCHES MINIMUM AND 0.1094 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-184-1004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
177030-106
NSN: 3110-00-184-1004
FSC: 3110
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.2185 INCHES MINIMUM AND 0.2187 INCHES MAXIMUM IN
overall_width0.1084 INCHES MINIMUM AND 0.1094 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
special_featuresALL CORNER RADII 0.0050 IN. IN
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-184-1004
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 177030-106 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 0.2185 INCHES MINIMUM AND 0.2187 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
BORE DIAMETER0.2185 INCHES MINIMUM AND 0.2187 INCHES MAXIMUM IN
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
OVERALL WIDTH0.1084 INCHES MINIMUM AND 0.1094 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
SPECIAL FEATURESALL CORNER RADII 0.0050 IN. IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
615-0003-001Interchangeable
interchangeable cross-reference
interchangeable
1577Interchangeable
interchangeable cross-reference
interchangeable
MR5844Interchangeable
interchangeable cross-reference
interchangeable
2167-808Interchangeable
interchangeable cross-reference
interchangeable
R909-34Interchangeable
interchangeable cross-reference
interchangeable
5732Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 177030-106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 177030-106?
177030-106 is a BEARING,BALL,ANNULAR.
What parts can replace 177030-106?
There are 20 known substitutes for 177030-106: 615-0003-001, 1577, MR5844 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 177030-106?
177030-106 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-184-1004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 177030-106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026