PartsTable
Technical Data Sheet
PartsTable / O-RING / SR 832-75-462
SR 832-75-462 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 16.918 INCHES MINIMUM AND 17.092 INCHES MAXIMUM IN, center_hole_diameter: 16.445 INCHES MINIMUM AND 16.505 INCHES MAXIMUM IN, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-046-4601, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SR 832-75-462
NSN: 5331-00-046-4601
FSC: 5331 — O-RING
CAGE: 95272 — STILLMAN SEAL CORPORATION DIV STILLMAN SEAL CORPERATION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter16.918 INCHES MINIMUM AND 17.092 INCHES MAXIMUM IN
center_hole_diameter16.445 INCHES MINIMUM AND 16.505 INCHES MAXIMUM IN
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN5331-00-046-4601
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SR 832-75-462 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 16.918 INCHES MINIMUM AND 17.092 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 16.445 INCHES MINIMUM AND 16.505 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER16.918 INCHES MINIMUM AND 17.092 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER16.445 INCHES MINIMUM AND 16.505 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
91T2128Interchangeable
interchangeable cross-reference
interchangeable
6905Interchangeable
interchangeable cross-reference
interchangeable
82-SInterchangeable
interchangeable cross-reference
interchangeable
MS28775-462Interchangeable
interchangeable cross-reference
interchangeable
215-4642224ITEM1-26Interchangeable
interchangeable cross-reference
interchangeable
N304-75-462Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SR 832-75-462?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SR 832-75-462?
SR 832-75-462 is a O-RING.
What parts can replace SR 832-75-462?
There are 14 known substitutes for SR 832-75-462: 91T2128, 6905, 82-S and 11 more. Substitute compatibility should be verified for your specific system.
Is SR 832-75-462 still available?
SR 832-75-462 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SR 832-75-462

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026