PartsTable / O-RING / MS28775-462
MS28775-462
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, peripheral_diameter: 17.005 INCHES NOMINAL IN, center_hole_diameter: 16.410 INCHES MINIMUM AND 16.500 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-046-4601, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS28775-462
NSN: 5331-00-046-4601 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR temp_rating -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF peripheral_diameter 17.005 INCHES NOMINAL IN center_hole_diameter 16.410 INCHES MINIMUM AND 16.500 INCHES MAXIMUM IN elongation_percentage 160 MAXIMUM cross-sectional_height 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN departure_from_cited_document MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS criticality_code_justification ZZZW NSN 5331-00-046-4601
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: MS28775-462
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 16.918 INCHES MINIMUM AND 17.092 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 16.445 INCHES MINIMUM AND 16.505 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 16.918 INCHES MINIMUM AND 17.092 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 16.445 INCHES MINIMUM AND 16.505 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
91T2128 Interchangeable interchangeable cross-reference
interchangeable
6905 Interchangeable interchangeable cross-reference
interchangeable
82-S Interchangeable interchangeable cross-reference
interchangeable
MS28775-462 Interchangeable interchangeable cross-reference
interchangeable
N304-75-462 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy MS28775-462?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28775-462?
MS28775-462 is a O-RING.
What parts can replace MS28775-462?
There are 14 known substitutes for MS28775-462: 91T2128, 6905, 82-S and 11 more. Substitute compatibility should be verified for your specific system.
Is MS28775-462 still available?
MS28775-462 is currently cancelled.
Request a Quote — MS28775-462