PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SQAP13204E1700
SQAP13204E1700 ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

The TRANSFORMER,CURRENT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BODY, body_width: 2.190 INCHES NOMINAL IN, body_height: 4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM IN, body_length: 3.750 INCHES NOMINAL IN, inclosure_type: FULLY INCLOSED, connection_type: UNTHREADED INTERNAL TUBE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4810-00-190-7941, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SQAP13204E1700
NSN: 4810-00-190-7941
FSC: 4810
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
materialCOPPER ALLOY BODY
body_width2.190 INCHES NOMINAL IN
body_height4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM IN
body_length3.750 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
connection_typeUNTHREADED INTERNAL TUBE FIRST END
mounting_methodFLANGE AND SLOT SINGLE GROUP
connection_stylePLAIN (TUBE) SECOND END
frequency_rating400.0 HERTZ MAXIMUM SINGLE COMPONENT
special_featuresPRIMARY RATED BUT NOT INCLUDED
style_designatorSTRAIGHT THRU
aperture_diameter0.250 INCHES NOMINAL IN
NSN4810-00-190-7941
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: SQAP13204E1700 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT THRU
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.375 INCHES SECOND END IN
•
MATERIAL: COPPER ALLOY BODY
•
FLOW CONTROL DEVICE: DIAPHRAGM
•
CURRENT RATING IN AMPS: 0.510
•
OPERATING PRESSURE: 425.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER0.250 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT THRU
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.375 INCHES SECOND END IN
MATERIALCOPPER ALLOY BODY
SPECIAL FEATURESWITH TWO WIRE LEADS AND CONNECTOR
FLOW CONTROL DEVICEDIAPHRAGM
CURRENT RATING IN AMPS0.510
OPERATING PRESSURE425.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MATERIALCOPPER ALLOY SEAT
CONNECTION STYLEPLAIN (TUBE) FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
M0DEL51Interchangeable
interchangeable cross-reference
interchangeable
13214E8712Interchangeable
interchangeable cross-reference
interchangeable
SQAP13204E1700Interchangeable
interchangeable cross-reference
interchangeable
ORS323Interchangeable
interchangeable cross-reference
interchangeable
13216E6158Interchangeable
interchangeable cross-reference
interchangeable
TIP01542-23JUL71Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SQAP13204E1700?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SQAP13204E1700?
SQAP13204E1700 is a TRANSFORMER,CURRENT.
What parts can replace SQAP13204E1700?
There are 10 known substitutes for SQAP13204E1700: M0DEL51, 13214E8712, SQAP13204E1700 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SQAP13204E1700?
SQAP13204E1700 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4810-00-190-7941. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SQAP13204E1700

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026