The VALVE,SOLENOID is a the manufacturer industrial component. Key specifications include connection_type: BUTT WELD TUBE FIRST END, style_designator: STRAIGHT THRU, aperture_diameter: 0.250 INCHES NOMINAL IN, mounting_position: HORIZONTAL, operating_pressure: 300.0 POUNDS PER SQUARE INCH (PSI) NOMINAL POWER DRIVE LBS, flow_control_device: DIAPHRAGM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4810-00-493-1844, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| connection_type | BUTT WELD TUBE FIRST END |
| style_designator | STRAIGHT THRU |
| aperture_diameter | 0.250 INCHES NOMINAL IN |
| mounting_position | HORIZONTAL |
| operating_pressure | 300.0 POUNDS PER SQUARE INCH (PSI) NOMINAL POWER DRIVE LBS |
| flow_control_device | DIAPHRAGM |
| current_rating_in_amps | 0.510 |
| valve_operation_method | SOLENOID |
| voltage_in_volts_and_current_type | 24.0 DC |
| nominal_outside_diameter_tube_accommodated | 0.500 INCHES FIRST END IN |
| flow_control_device_normal_operation_position | OPEN |
| NSN | 4810-00-493-1844 |
| STYLE DESIGNATOR | STRAIGHT THRU |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 24.0 DC |
| FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES FIRST END IN |
| VALVE OPERATION METHOD | SOLENOID |
| TEST DATA DOCUMENT | 97403-13216E6158 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CURRENT RATING IN AMPS | 0.510 |
| APERTURE DIAMETER | 0.250 INCHES NOMINAL IN |
| FLOW CONTROL DEVICE | DIAPHRAGM |
| CONNECTION TYPE | BUTT WELD TUBE FIRST END |