PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SPP66-0060
SPP66-0060 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, head_style: HEXAGON, head_height: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.500 INCHES MINIMUM AND 1.687 INCHES MAXIMUM IN, fastener_length: 2.131 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-422-6589, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SPP66-0060
NSN: 5305-01-422-6589
FSC: 5305
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
head_styleHEXAGON
head_height0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
thread_class2A A
thread_length1.500 INCHES MINIMUM AND 1.687 INCHES MAXIMUM IN
fastener_length2.131 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
special_featuresCRES COMP 316 ONLY
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.922 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch11
NSN5305-01-422-6589
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SPP66-0060 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH BETWEEN FLATS: 0.922 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY MATERIAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: FF-S-85 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL COMP 316 OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
THREAD QUANTITY PER INCH: 11
•
FASTENER LENGTH: 2.131 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH BETWEEN FLATS0.922 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY MATERIAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONFF-S-85 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALSTEEL COMP 316 OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD QUANTITY PER INCH11
FASTENER LENGTH2.131 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONFF-S-85 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.625 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
MS35307-465Interchangeable
interchangeable cross-reference
interchangeable
36400Interchangeable
interchangeable cross-reference
interchangeable
MS35307-465 CRE S 316 ONLYInterchangeable
Same NIIN cross-reference
interchangeable
MS35307-465S316Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SPP66-0060?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SPP66-0060?
SPP66-0060 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace SPP66-0060?
There are 4 known substitutes for SPP66-0060: MS35307-465, 36400, MS35307-465 CRE S 316 ONLY and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SPP66-0060?
SPP66-0060 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-422-6589. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SPP66-0060

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026