PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35307-465
MS35307-465 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, head_style: HEXAGON, head_height: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.500 INCHES MINIMUM AND 1.687 INCHES MAXIMUM IN, fastener_length: 2.131 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-925-7853, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35307-465
NSN: 5305-00-925-7853
FSC: 5305
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
head_styleHEXAGON
head_height0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
thread_class2A A
thread_length1.500 INCHES MINIMUM AND 1.687 INCHES MAXIMUM IN
fastener_length2.131 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
special_featuresCRES COMP 316 ONLY
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.922 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch11
NSN5305-00-925-7853
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35307-465 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 11
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
HEAD HEIGHT: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.672 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN
•
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH LBS
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH11
MATERIALSTEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
HEAD HEIGHT0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
THREAD LENGTH1.672 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN
MINIMUM YIELD STRENGTH30000 POUNDS PER SQUARE INCH LBS
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.625 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2N398BInterchangeable
interchangeable cross-reference
interchangeable
40044 PC 21Interchangeable
interchangeable cross-reference
interchangeable
40044Interchangeable
interchangeable cross-reference
interchangeable
364-00Interchangeable
interchangeable cross-reference
interchangeable
MS35307-465 CRE S 316 ONLYInterchangeable
interchangeable cross-reference
interchangeable
MS35307-465S316Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35307-465?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35307-465?
MS35307-465 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35307-465?
There are 7 known substitutes for MS35307-465: 2N398B, 40044 PC 21, 40044 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35307-465?
MS35307-465 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-925-7853. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35307-465

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026