PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SP1000
SP1000 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BALL JOINT is a the manufacturer industrial component. Key specifications include height: 0.875 INCHES NOMINAL IN, length: 1.156 INCHES NOMINAL IN, material: STEEL, special_features: NONADJUSTABLE;SPRING-NOT INCL.;LGTH TO JOINT 0.875 IN.;BALL END THD LGTH 0.437 IN.;SURFACE TREAT.-CADMIUM PLATE IN, style_designator: SINGLE, RIGHT ANGLE, PLUGGED, ball_end_thread_location: EXTERNAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-709-7614, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP1000
NSN: 5310-00-709-7614
FSC: 5310
CAGE: 94882 — JERGENS INC DIV TOOLING COMPONENTS DIVISION (USA)
SPECIFICATIONS
height0.875 INCHES NOMINAL IN
length1.156 INCHES NOMINAL IN
materialSTEEL
special_featuresNONADJUSTABLE;SPRING-NOT INCL.;LGTH TO JOINT 0.875 IN.;BALL END THD LGTH 0.437 IN.;SURFACE TREAT.-CADMIUM PLATE IN
style_designatorSINGLE, RIGHT ANGLE, PLUGGED
ball_end_thread_locationEXTERNAL
ball_end_thread_directionRIGHT
socket_end_thread_locationINTERNAL
socket_end_thread_directionRIGHT
ball_end_connection_thread_provisionTHREADED
socket_end_connection_thread_provisionTHREADED
ball_end_thread_size_and_series/type_designator0.190-32 UNF
NSN5310-00-709-7614
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SP1000 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
500Interchangeable
interchangeable cross-reference
interchangeable
2511 9/64Interchangeable
interchangeable cross-reference
interchangeable
110 9/64Interchangeable
interchangeable cross-reference
interchangeable
41109Interchangeable
interchangeable cross-reference
interchangeable
16A3749Interchangeable
interchangeable cross-reference
interchangeable
17986RInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SP1000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP1000?
SP1000 is a BALL JOINT.
What parts can replace SP1000?
There are 12 known substitutes for SP1000: 500, 2511 9/64, 110 9/64 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SP1000?
SP1000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-709-7614. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP1000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026