PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 110 9/64

110 9/64 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, flute_length: 2.125 INCHES NOMINAL IN, overall_width: 0.9260 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0619, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
110 9/64
NSN: 3110-00-100-0619
FSC: 3110
CAGE: 97907 — TEREX CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length2.125 INCHES NOMINAL IN
overall_width0.9260 INCHES NOMINAL IN
flute_quantity2
overall_length5.375 INCHES NOMINAL IN
outside_diameter5.5130 INCHES NOMINAL IN
special_featuresSTEEP ANGLE
style_designatorNORMAL ANGLE
cutting_end_styleGENERAL PURPOSE
NSN3110-00-100-0619
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 110 9/64 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0940 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 5.5130 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.0940 INCHES NOMINAL IN
OVERALL WIDTH0.9260 INCHES NOMINAL IN
SPECIAL FEATURESSTEEP ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER5.5130 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
01158100Interchangeable
interchangeable cross-reference
interchangeable
119275Interchangeable
interchangeable cross-reference
interchangeable
3100C3-180NInterchangeable
interchangeable cross-reference
interchangeable
14-85437-00Interchangeable
interchangeable cross-reference
interchangeable
A15437Interchangeable
interchangeable cross-reference
interchangeable
500Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 110 9/64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110 9/64?
110 9/64 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 110 9/64?
There are 24 known substitutes for 110 9/64: 01158100, 119275, 3100C3-180N and 21 more. Substitute compatibility should be verified for your specific system.
Is 110 9/64 still available?
110 9/64 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110 9/64

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026