Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN, length: 0.395 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_height: 0.480 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-990-6410, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
SMD501001-2
NSN:5340-00-990-6410 FSC:5340 CAGE:80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
width
0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
length
0.395 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
material
STEEL OVERALL
hole_diameter
0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
overall_height
0.480 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.007 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
loop/holding_dimension
0.370 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
NSN
5340-00-990-6410
COMPONENT DIAGRAM
KEY FEATURES
•
WIDTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
HOLE DIAMETER: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
•
LOOP/HOLDING DIMENSION: 0.370 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
•
LENGTH: 0.395 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SMD501001-2?
SMD501001-2 is a CLIP,SPRING TENSION.
What parts can replace SMD501001-2?
There are 10 known substitutes for SMD501001-2: 162, 511, P-162 CAD P2 and 7 more. Substitute compatibility should be verified for your specific system.
Is SMD501001-2 still available?
SMD501001-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.