PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P-162 CAD P2
P-162 CAD P2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: IRON MALLEABLE HOOK, design_type: FIXED, end_position: HOOKS IN SAME PLANE, overall_length: 4.312 INCHES NOMINAL IN, unattached_ring: NOT INCLUDED, hook_style_designator: SLIDING BOLT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-168-2156, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P-162 CAD P2
NSN: 5340-01-168-2156
FSC: 5340
CAGE: 76786 — BUCKLES INTERNATIONAL, INC. (USA)
SPECIFICATIONS
materialIRON MALLEABLE HOOK
design_typeFIXED
end_positionHOOKS IN SAME PLANE
overall_length4.312 INCHES NOMINAL IN
unattached_ringNOT INCLUDED
hook_style_designatorSLIDING BOLT
rubber_covered_featureNOT INCLUDED
NSN5340-01-168-2156
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P-162 CAD P2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: IRON MALLEABLE CONNECTION END
•
UNATTACHED RING: NOT INCLUDED
•
RUBBER COVERED FEATURE: NOT INCLUDED
•
HOOK STYLE DESIGNATOR: SLIDING BOLT
•
DESIGN TYPE: FIXED
•
END POSITION: HOOKS IN SAME PLANE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALIRON MALLEABLE CONNECTION END
MATERIALIRON MALLEABLE HOOK
UNATTACHED RINGNOT INCLUDED
RUBBER COVERED FEATURENOT INCLUDED
HOOK STYLE DESIGNATORSLIDING BOLT
DESIGN TYPEFIXED
END POSITIONHOOKS IN SAME PLANE
OVERALL LENGTH4.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
10015946-061Upgraded Successor
successor cross-reference
successor
SMD501001-2Upgraded Successor
successor cross-reference
successor
16-2Upgraded Successor
successor cross-reference
successor
F92I346Upgraded Successor
successor cross-reference
successor
92-10-27-197 DEUpgraded Successor
successor cross-reference
successor
5193423Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P-162 CAD P2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P-162 CAD P2?
P-162 CAD P2 is a SNAP HOOK.
What parts can replace P-162 CAD P2?
There are 7 known substitutes for P-162 CAD P2: 10015946-061, SMD501001-2, 16-2 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P-162 CAD P2?
P-162 CAD P2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-168-2156. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P-162 CAD P2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026