PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SM1101K2
SM1101K2 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 1.1811 INCHES MINIMUM AND 1.1816 INCHES MAXIMUM IN, overall_width: 1.8963 INCHES MINIMUM AND 1.9163 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-5983, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SM1101K2
NSN: 3110-00-158-5983
FSC: 3110
CAGE: 43491 — GENERAL SIGNAL CORP (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter1.1811 INCHES MINIMUM AND 1.1816 INCHES MAXIMUM IN
overall_width1.8963 INCHES MINIMUM AND 1.9163 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
outer_ring_width0.6299 INCHES NOMINAL IN
style_designatorSINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
overall_outside_diameter2.4403 INCHES MINIMUM AND 2.4409 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-158-5983
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SM1101K2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STYLE DESIGNATOR: SINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
•
MATERIAL: STEEL OUTER RING
•
BORE DIAMETER: 1.1811 INCHES MINIMUM AND 1.1816 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 2.4403 INCHES MINIMUM AND 2.4409 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
STYLE DESIGNATORSINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
MATERIALSTEEL BALL
BORE DIAMETER1.1811 INCHES MINIMUM AND 1.1816 INCHES MAXIMUM IN
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER2.4403 INCHES MINIMUM AND 2.4409 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
OVERALL WIDTH1.8963 INCHES MINIMUM AND 1.9163 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
FF-B-2844Interchangeable
interchangeable cross-reference
interchangeable
3TAR17-24UInterchangeable
interchangeable cross-reference
interchangeable
5189342Interchangeable
interchangeable cross-reference
interchangeable
1-210761-3Interchangeable
interchangeable cross-reference
interchangeable
30111Interchangeable
interchangeable cross-reference
interchangeable
W5939092PC24Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SM1101K2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SM1101K2?
SM1101K2 is a BEARING,BALL,ANNULAR.
What parts can replace SM1101K2?
There are 32 known substitutes for SM1101K2: FF-B-2844, 3TAR17-24U, 5189342 and 29 more. Substitute compatibility should be verified for your specific system.
Is SM1101K2 still available?
SM1101K2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SM1101K2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026