PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SFR133PPK25/24
SFR133PPK25/24 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The SFR133PPK25/24 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-840-3502, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFR133PPK25/24
NSN: 3110-00-840-3502
FSC: 3110
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
Part NumberSFR133PPK25/24
NSN3110-00-840-3502
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SFR133PPK25/24 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
•
FLANGE WIDTH: 0.0310 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
OUTER RING OUTSIDE DIAMETER: 0.1875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
FLANGE WIDTH0.0310 INCHES NOMINAL IN
SHIELD QUANTITY2
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.7
OUTER RING OUTSIDE DIAMETER0.1875 INCHES NOMINAL IN
FLANGE OUTSIDE DIAMETER0.2340 INCHES NOMINAL IN
LUBRICATION MATERIALOIL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
0495-3Interchangeable
interchangeable cross-reference
interchangeable
79-012-062-0250Interchangeable
interchangeable cross-reference
interchangeable
SYLC741Interchangeable
interchangeable cross-reference
interchangeable
SFR133PPK25Interchangeable
interchangeable cross-reference
interchangeable
SS3332FCHHInterchangeable
Same NIIN cross-reference
interchangeable
603-002-004Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SFR133PPK25/24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFR133PPK25/24?
SFR133PPK25/24 is a SFR133PPK25/24.
What parts can replace SFR133PPK25/24?
There are 12 known substitutes for SFR133PPK25/24: 0495-3, 79-012-062-0250, SYLC741 and 9 more. Substitute compatibility should be verified for your specific system.
Is SFR133PPK25/24 still available?
SFR133PPK25/24 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFR133PPK25/24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026