PartsTable
Technical Data Sheet
Download PDF

0495-3 — FILTER,BAND PASS

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

0495-3: FILTER,BAND PASS.

The FILTER,BAND PASS is a the manufacturer industrial component. Key specifications include diameter: 0.066 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN, material: STEEL COMP 410 OR STEEL COMP 420 OVERALL, nut_style: HEXAGON, nut_height: 0.203 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-266-0342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 0495-3
NSN: 5310-00-266-0342
NIINs: 002660342, 008385919, 008473735
FSC: 5310 — Nuts and Washers
CAGE: 35301 — DRESSER INDUSTRIES INC LEROI DIV (USA)
SPECIFICATIONS
diameter0.066 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
materialSTEEL COMP 410 OR STEEL COMP 420 OVERALL
nut_styleHEXAGON
nut_height0.203 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
inclosure_typeHERMETICALLY SEALED
overall_length0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
hardness_rating43.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSLOTTED
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
NSN5310-00-266-0342
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0495-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.625 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: A6 TYPE
•
NUT HEIGHT: 0.203 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.625 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NONDEFINITIVE SPEC/STD DATAA6 TYPE
NUT HEIGHT0.203 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH24
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
39122DReference document
Same NSN cross-reference
Reference document — Secondary reference
FFB571TYPEA6Reference document
Same NSN cross-reference
Reference document — Identification reference
5B9079Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 0495-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0495-3?
0495-3 is a FILTER,BAND PASS. It is classified as a MRO (MRO_GENERAL).
What parts can replace 0495-3?
There are 3 known substitutes for 0495-3: 39122D, FFB571TYPEA6, 5B9079. Substitute compatibility should be verified for your specific system.
What is the NSN for 0495-3?
0495-3 is cataloged in the U.S. Government catalog under NSN 5310-00-266-0342. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0495-3