PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SFR-0440-AA-04
SFR-0440-AA-04 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.038 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.122 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-047-6234, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SFR-0440-AA-04
NSN: 5305-01-047-6234
FSC: 5305
CAGE: 97539 — APM HEXSEAL CORP (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.038 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.122 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
special_featuresFURNISHED WITH SILICONE 0-RNG
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
NSN5305-01-047-6234
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SFR-0440-AA-04 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SCREW MATERIAL: STEEL CORROSION RESISTING
•
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
•
THREAD LENGTH: 0.122 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
•
HEAD HEIGHT: 0.038 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
FASTENER LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIALSTEEL CORROSION RESISTING
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
THREAD LENGTH0.122 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
HEAD HEIGHT0.038 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
HEAD DIAMETER0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
107762Interchangeable
interchangeable cross-reference
interchangeable
6X12Interchangeable
interchangeable cross-reference
interchangeable
0900942-4Interchangeable
interchangeable cross-reference
interchangeable
MS 24665-283Interchangeable
interchangeable cross-reference
interchangeable
103373Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SFR-0440-AA-04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SFR-0440-AA-04?
SFR-0440-AA-04 is a SCREW,MACHINE.
What parts can replace SFR-0440-AA-04?
There are 5 known substitutes for SFR-0440-AA-04: 107762, 6X12, 0900942-4 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SFR-0440-AA-04?
SFR-0440-AA-04 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-047-6234. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SFR-0440-AA-04

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026