PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 107762
107762 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PANEL,COCKPIT LEFT is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.038 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.122 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-7762, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
107762
NSN: 5315-00-010-7762
FSC: 5315
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.038 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.122 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
special_featuresFURNISHED WITH SILICONE 0-RNG
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
NSN5315-00-010-7762
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 107762 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STANDARD
•
MATERIAL: STEEL OVERALL
•
DIAMETER: 0.094 INCHES NOMINAL IN
•
UNDERLOOP LENGTH: 0.625 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 4 CLASS
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSTANDARD
MATERIALSTEEL OVERALL
DIAMETER0.094 INCHES NOMINAL IN
UNDERLOOP LENGTH0.625 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAB TYPE AND 4 CLASS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
6208785Interchangeable
interchangeable cross-reference
interchangeable
SA2735-1Interchangeable
interchangeable cross-reference
interchangeable
200824Interchangeable
interchangeable cross-reference
interchangeable
00082420Interchangeable
interchangeable cross-reference
interchangeable
1FC479Interchangeable
interchangeable cross-reference
interchangeable
GS839FB1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 107762?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 107762?
107762 is a PANEL,COCKPIT LEFT.
What parts can replace 107762?
There are 27 known substitutes for 107762: 6208785, SA2735-1, 200824 and 24 more. Substitute compatibility should be verified for your specific system.
Is 107762 still available?
107762 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 107762

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026