PartsTable
Technical Data Sheet
Download PDF

SD 10022 — TRANSISTOR

✓ Government record, cited
— · SFP TRANSCEIVER
PRODUCT OVERVIEW

SD 10022: TRANSISTOR.

The TRANSISTOR is a the manufacturer industrial component. Key specifications include material: CERAMIC OR PLASTIC ENCLOSURE, overall_width: 0.535 INCHES MINIMUM AND 0.545 INCHES MAXIMUM IN, overall_height: 0.249 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, overall_length: 0.790 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 0.700 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5961-01-322-7092, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SD 10022
NSN: 5961-01-322-7092
FSC: 5961 — Semiconductor Devices and Associated Hardware
CAGE: 21845 — SOLITRON DEVICES, INC. (USA)
SPECIFICATIONS
materialCERAMIC OR PLASTIC ENCLOSURE
overall_width0.535 INCHES MINIMUM AND 0.545 INCHES MAXIMUM IN
overall_height0.249 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
overall_length0.790 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length0.700 INCHES MINIMUM IN
special_featuresITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. L04272
internal_configurationFIELD EFFECT
semiconductor_materialSILICON
terminal_type_and_quantity3 UNINSULATED WIRE LEAD
criticality_code_justificationZZZY
power_rating_per_characteristic125.0 WATTS MAXIMUM TOTAL DEVICE DISSIPATION
NSN5961-01-322-7092
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN SD 10022 MFR OEM TRANSISTOR
KEY FEATURES
•
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: 200.0 NOMINAL BREAKDOWN VOLTAGE, DRAIN-TO-SOURCE, WITH ALL OTHER TERMINALS SHORT-CIRCUITED TO SOURCE
•
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT: 150.0 CELSIUS JUNCTION DEGC
•
TERMINAL LENGTH: 0.700 INCHES MINIMUM IN
•
MOUNTING METHOD: TERMINAL
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
SEMICONDUCTOR MATERIAL: SILICON
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.249 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC200.0 NOMINAL BREAKDOWN VOLTAGE, DRAIN-TO-SOURCE, WITH ALL OTHER TERMINALS SHORT-CIRCUITED TO SOURCE
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT150.0 CELSIUS JUNCTION DEGC
TERMINAL LENGTH0.700 INCHES MINIMUM IN
MOUNTING METHODTERMINAL
CRITICALITY CODE JUSTIFICATIONZZZY
SEMICONDUCTOR MATERIALSILICON
OVERALL LENGTH0.790 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN
INTERNAL CONFIGURATIONFIELD EFFECT
OVERALL WIDTH0.535 INCHES MINIMUM AND 0.545 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
IRFM250Reference document
Same NSN cross-reference
Reference document — Secondary reference
LO4272Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
KFU165AReference document
Same NSN cross-reference
Reference document — Design control — primary reference
OM1432SAReference document
Same NSN cross-reference
Reference document — Secondary reference
NBE1974Reference document
Same NSN cross-reference
Reference document — Secondary reference
IRF250Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SD 10022?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SD 10022?
SD 10022 is a TRANSISTOR.
What parts can replace SD 10022?
There are 7 known substitutes for SD 10022: IRFM250, LO4272, KFU165A and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SD 10022?
SD 10022 is cataloged in the U.S. Government catalog under NSN 5961-01-322-7092. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SD 10022