SB1B3-102MS — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

SB1B3-102MS: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include body_style: W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS, body_length: 0.359 INCHES NOMINAL IN, terminal_length: 0.415 INCHES NOMINAL IN, width_across_flats: 0.187 INCHES NOMINAL IN, nominal_thread_size: 0.164 INCHES IN, reliability_indicator: ESTABLISHED. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-285-8018, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ SB1B3-102MS

NSN: 5910-01-285-8018
FSC: 5910 — Capacitors
CAGE: 59942 — AVX FILTERS CORPORATION (USA)

SPECIFICATIONS

body_style	W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
body_length	0.359 INCHES NOMINAL IN
terminal_length	0.415 INCHES NOMINAL IN
width_across_flats	0.187 INCHES NOMINAL IN
nominal_thread_size	0.164 INCHES IN
reliability_indicator	ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 SOLDER STUD
specification/standard_data	81349-MIL-C-39014/18 GOVERNMENT SPECIFICATION
tolerance_range_per_section	-20.00 TO 80.00 PERCENT SINGLE SECTION
schematic_diagram_designator	FEEDTHROUGH
NSN	5910-01-285-8018

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING FACILITY TYPE AND QUANTITY: 1 THREADED BUSHING

•

WIDTH ACROSS FLATS: 0.187 INCHES NOMINAL IN

•

BODY STYLE: W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS

•

TOLERANCE RANGE PER SECTION: -20.00 TO 80.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 0.415 INCHES NOMINAL IN

•

MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING
WIDTH ACROSS FLATS	0.187 INCHES NOMINAL IN
BODY STYLE	W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
TOLERANCE RANGE PER SECTION	-20.00 TO 80.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	0.415 INCHES NOMINAL IN
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.100
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	200.0 DC SINGLE SECTION

SUBSTITUTES & CROSS-REFERENCES 4

203-9001-710Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2136-3246-102-V FReference document

Same NSN cross-reference

Reference document — Secondary reference

M39014/18-0347Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-C-39014/18Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy SB1B3-102MS?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SB1B3-102MS?

SB1B3-102MS is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).

What parts can replace SB1B3-102MS?

There are 4 known substitutes for SB1B3-102MS: 203-9001-710, 2136-3246-102-V F, M39014/18-0347 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for SB1B3-102MS?

SB1B3-102MS is cataloged in the U.S. Government catalog under NSN 5910-01-285-8018. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SB1B3-102MS — CAPACITOR,FIXED,CERAMIC DIELECTR

Request a Quote — SB1B3-102MS