MIL-C-39014/18 — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

MIL-C-39014/18: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include body_style: W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS, body_length: 0.359 INCHES NOMINAL IN, terminal_length: 0.415 INCHES NOMINAL IN, terminal_diameter: 0.100 INCHES NOMINAL IN, width_across_flats: 0.191 INCHES NOMINAL IN, nominal_thread_size: 0.164 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-026-0806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ MIL-C-39014/18

NSN: 5910-01-026-0806
NIINs: 010260806, 010265809, 010296382, 010786651, 011145160, 011491911, 011555318, 011582362, 011590676, 012262572, 012858018, 013351877
FSC: 5910 — Capacitors
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
body_length	0.359 INCHES NOMINAL IN
terminal_length	0.415 INCHES NOMINAL IN
terminal_diameter	0.100 INCHES NOMINAL IN
width_across_flats	0.191 INCHES NOMINAL IN
nominal_thread_size	0.164 INCHES IN
reliability_indicator	ESTABLISHED
end_item_identification	5840-01-141-4378 RADAR SET
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 SOLDER STUD
specification/standard_data	81349-MIL-C-39014/18 GOVERNMENT SPECIFICATION
NSN	5910-01-026-0806

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING FACILITY TYPE AND QUANTITY: 1 THREADED BUSHING

•

WIDTH ACROSS FLATS: 0.187 INCHES NOMINAL IN

•

BODY STYLE: W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS

•

TOLERANCE RANGE PER SECTION: -20.00 TO 80.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 0.365 INCHES NOMINAL IN

•

MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING
WIDTH ACROSS FLATS	0.187 INCHES NOMINAL IN
BODY STYLE	W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
TOLERANCE RANGE PER SECTION	-20.00 TO 80.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	0.365 INCHES NOMINAL IN
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
RELIABILITY FAILURE RATE LEVEL IN PERCENT	2.0000
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	200.0 DC SINGLE SECTION

SUBSTITUTES & CROSS-REFERENCES 2

M39014/18-0304Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

584R226H01Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy MIL-C-39014/18?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MIL-C-39014/18?

MIL-C-39014/18 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).

What parts can replace MIL-C-39014/18?

There are 2 known substitutes for MIL-C-39014/18: M39014/18-0304, 584R226H01. Substitute compatibility should be verified for your specific system.

What is the NSN for MIL-C-39014/18?

MIL-C-39014/18 is cataloged in the U.S. Government catalog under NSN 5910-01-026-0806. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MIL-C-39014/18 — CAPACITOR,FIXED,CERAMIC DIELECTR

Request a Quote — MIL-C-39014/18