PartsTable
Technical Data Sheet
Download PDF

SAE-J517-54-4 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

SAE-J517-54-4: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include wall_thickness: 0.340 INCHES NOMINAL IN, inside_diameter: 0.250 INCHES NOMINAL IN, outside_diameter: 0.590 INCHES NOMINAL IN, operating_pressure: 5800.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM FIRST RESPONSE LBS, end_item_identification: 2355-01-539-3639;LIGHT ARMORED VEHICLE, media_for_which_designed: HYDRAULIC FLUID SINGLE RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-607-6448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-J517-54-4
NSN: 4720-01-607-6448
FSC: 4720 — Hose and Flexible Tubing
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
wall_thickness0.340 INCHES NOMINAL IN
inside_diameter0.250 INCHES NOMINAL IN
outside_diameter0.590 INCHES NOMINAL IN
operating_pressure5800.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM FIRST RESPONSE LBS
end_item_identification2355-01-539-3639;LIGHT ARMORED VEHICLE
media_for_which_designedHYDRAULIC FLUID SINGLE RESPONSE
inner_conveying_tube_stylePLAIN
cross-sectional_shape_styleROUND
minimum_inside_bending_radius4.0 INCHES IN
layer_composition_and_location1ST LAYER MOLDED RUBBER, NITRILE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER MOLDED RUBBER, SYNTHETIC
part_name_assigned_by_controlling_agencyHOSE
NSN4720-01-607-6448
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: SAE-J517-54-4 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM INSIDE BENDING RADIUS: 4.0 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER MOLDED RUBBER, NITRILE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER MOLDED RUBBER, SYNTHETIC
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
WALL THICKNESS: 0.340 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.590 INCHES NOMINAL IN
•
OPERATING PRESSURE: 5800.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM FIRST RESPONSE LBS
•
INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MINIMUM INSIDE BENDING RADIUS4.0 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER MOLDED RUBBER, NITRILE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER MOLDED RUBBER, SYNTHETIC
CROSS-SECTIONAL SHAPE STYLEROUND
WALL THICKNESS0.340 INCHES NOMINAL IN
OUTSIDE DIAMETER0.590 INCHES NOMINAL IN
OPERATING PRESSURE5800.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM FIRST RESPONSE LBS
INSIDE DIAMETER0.250 INCHES NOMINAL IN
SPECIAL FEATURESCONSTRUCTION: INNER TUBE: NITRILE RUBBER,REINFORCEMENT: TWO BRAIDS STEEL WIRE,COVER: SYNTHETIC RUBBER;TEMPERATURE: PETROLEUM-BASED HYDRAULIC FLUIDS OF -40 DEGREE FAHRENHEIT TO 212 DEGREE FAHRENHEIT,WATER,WATER/OIL EMULSION AND WATER/GLYCOL UP TO 185 DEGREE FAHRENHEIT
MEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID SINGLE RESPONSE
PART NAME ASSIGNED BY CONTROLLING AGENCYHOSE
OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4720-00-000-0080 4720-00-000-0081 4720-00-000-0084 4720-00-000-0724 4720-00-001-0014 4720-00-001-0015 4720-00-001-0023 4720-00-001-0025
SUBSTITUTES & CROSS-REFERENCES 4
302-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-J517Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAE-J517-54-4-36Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-J517-54-4-00036Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SAE-J517-54-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-J517-54-4?
SAE-J517-54-4 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace SAE-J517-54-4?
There are 4 known substitutes for SAE-J517-54-4: 302-4, SAE-J517, SAE-J517-54-4-36 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-J517-54-4?
SAE-J517-54-4 is cataloged in the U.S. Government catalog under NSN 4720-01-607-6448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-J517-54-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.