PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SAE-J517
SAE-J517 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

HOSE ASSEMBLY,NONMETALLIC,FIRE F. Key specifications include material: STEEL OVERALL, flow_angle: 90.0 DEGREES, leg_length: 2.110 INCHES NOMINAL FIRST END IN, seat_angle: 37.0 DEGREES ALL ENDS, thread_class: 2A FIRST END BULKHEAD A, wall_thickness: 0.340 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-203-2509, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-J517
NSN: 4720-00-203-2509
FSC: 4720
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL OVERALL
flow_angle90.0 DEGREES
leg_length2.110 INCHES NOMINAL FIRST END IN
seat_angle37.0 DEGREES ALL ENDS
thread_class2A FIRST END BULKHEAD A
wall_thickness0.340 INCHES NOMINAL IN
connection_typeTHREADED EXTERNAL TUBE FIRST END BULKHEAD
inside_diameter0.250 INCHES NOMINAL IN
connection_styleFLARED (TUBE) ALL ENDS
outside_diameter0.590 INCHES NOMINAL IN
operating_pressure5800.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM FIRST RESPONSE LBS
nominal_thread_size0.750 INCHES FIRST END BULKHEAD IN
NSN4720-00-203-2509
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: SAE-J517 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED COTTON CORD
•
BURST TEST PRESSURE: 2000.0 POUNDS PER SQUARE INCH LBS
•
OUTSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
CONNECTION TYPE: THREADED EXTERNAL TUBE FIRST END
•
THREAD QUANTITY PER INCH: 24 FIRST END
•
CONNECTION STYLE: SWIVEL NUT, INVERTED FLARE FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEROUND
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATIONOUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED COTTON CORD
BURST TEST PRESSURE2000.0 POUNDS PER SQUARE INCH LBS
OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
CONNECTION TYPETHREADED EXTERNAL TUBE FIRST END
THREAD QUANTITY PER INCH24 FIRST END
CONNECTION STYLESWIVEL NUT, INVERTED FLARE FIRST END
OPERATING PRESSURE500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND LIGHT RESISTANT AND OIL RESISTANT AND OZONE RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
J517Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SAE-J517?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-J517?
SAE-J517 is a HOSE ASSEMBLY,NONMETALLIC,FIRE F.
What parts can replace SAE-J517?
There is 1 known substitute for SAE-J517: J517. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-J517?
SAE-J517 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-203-2509. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-J517

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026