Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.369 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM IN, part_name_assigned_by_controlling_agency: SEAL STATIC. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-374-3472, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
SAE-AS83248/2
NSN:5331-01-374-3472 FSC:5331 — O-RING CAGE:0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
material
RUBBER FLUOROCARBON CLASS FPM
hardness_rating
90.0 SHORE DUROMETER A NOMINAL
center_hole_diameter
0.369 INCHES MAXIMUM IN
elongation_percentage
125 MAXIMUM
cross-sectional_height
0.067 INCHES MINIMUM IN
part_name_assigned_by_controlling_agency
SEAL STATIC
NSN
5331-01-374-3472
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: -83248/2 TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 22.835 INCHES MINIMUM AND 23.045 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT
0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
HARDNESS RATING
85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
-83248/2 TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER
22.835 INCHES MINIMUM AND 23.045 INCHES MAXIMUM IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS83248/2?
SAE-AS83248/2 is a O-RING.
What parts can replace SAE-AS83248/2?
There are 9 known substitutes for SAE-AS83248/2: AS3581-280, M83248/2-908, MIL-R-83248/2 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-AS83248/2?
SAE-AS83248/2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-374-3472. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.