PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-908
M83248/2-908 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-908 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5173, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-908
NSN: 5331-00-167-5173
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
Part NumberM83248/2-908
NSN5331-00-167-5173
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-908 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.635 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CRITICALITY CODE JUSTIFICATION: AGAV
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 0.818 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.635 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
CRITICALITY CODE JUSTIFICATIONAGAV
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER0.818 INCHES NOMINAL IN
END ITEM IDENTIFICATIONLAUNCHING ACCESSORIES
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
405393Interchangeable
interchangeable cross-reference
interchangeable
M83248-2-908CPInterchangeable
interchangeable cross-reference
interchangeable
63020 ITEM 14Interchangeable
interchangeable cross-reference
interchangeable
63020 ITEM 14CPInterchangeable
interchangeable cross-reference
interchangeable
675-00908Interchangeable
interchangeable cross-reference
interchangeable
86579908-16407Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-908?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-908?
M83248/2-908 is a M83248/2-908.
What parts can replace M83248/2-908?
There are 25 known substitutes for M83248/2-908: 405393, M83248-2-908CP, 63020 ITEM 14 and 22 more. Substitute compatibility should be verified for your specific system.
Is M83248/2-908 still available?
M83248/2-908 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-908

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026