PartsTable
Technical Data Sheet
Download PDF

SAE-AS7431 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SAE-AS7431: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 0.063 RADIANS NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN, first_leg_length: 0.625 INCHES NOMINAL IN, second_leg_style: END RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-042-5495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AS7431
NSN: 5340-00-042-5495
NIINs: 000425495, 000743983, 001502514, 002472533, 005141339, 005433936, 005988246, 005988250, 005988251, 005988253, 005988262, 006647995, 007218182, 007254432, 008004129, 008074335, 008114995, 008159068, 008226114, 008274417, 008279918, 008330590, 008347413, 008399499, 008423978, 008897170, 009358813, 010885382, 014511415, 014832640
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
first_leg_angle0.063 RADIANS NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
first_leg_length0.625 INCHES NOMINAL IN
second_leg_styleEND RADIUS
second_leg_width0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length0.625 INCHES NOMINAL IN
surface_treatmentANODIZE
first_leg_thickness0.063 INCHES NOMINAL IN
first_leg_end_radius0.250 INCHES NOMINAL IN
NSN5340-00-042-5495
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE-AS7431 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-A-8625,TY 2 FED SPEC 2ND TREATMENT RESPONSE
•
SECOND LEG WIDTH: 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-A-8625,TY 2 FED SPEC 2ND TREATMENT RESPONSE
SECOND LEG WIDTH0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SECOND LEG LENGTH0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SUBSTITUTES & CROSS-REFERENCES 2
A51L11091-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN743Z12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SAE-AS7431?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS7431?
SAE-AS7431 is a BRACKET,ANGLE.
What parts can replace SAE-AS7431?
There are 2 known substitutes for SAE-AS7431: A51L11091-13, AN743Z12. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-AS7431?
SAE-AS7431 is cataloged in the U.S. Government catalog under NSN 5340-00-042-5495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AS7431

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.