The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, first_leg_length: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, second_leg_style: END RADIUS. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-042-5495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AN743Z12
NSN:5340-00-042-5495 NIINs:000425495, 007254432 FSC:5340 — Hardware, Commercial CAGE:0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 2024
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
END RADIUS
first_leg_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
first_leg_length
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
second_leg_style
END RADIUS
second_leg_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designator
ANGLE
second_leg_length
0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
surface_treatment
ANODIZE
first_leg_thickness
0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
first_leg_end_radius
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
NSN
5340-00-042-5495
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-A-8625,TY 2 FED SPEC 2ND TREATMENT RESPONSE
•
SECOND LEG WIDTH: 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-A-8625,TY 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-A-8625,TY 2 FED SPEC 2ND TREATMENT RESPONSE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN743Z12?
AN743Z12 is a BRACKET,ANGLE.
What parts can replace AN743Z12?
There are 2 known substitutes for AN743Z12: A51L11091-13, SAE-AS7431. Substitute compatibility should be verified for your specific system.
What is the NSN for AN743Z12?
AN743Z12 is cataloged in the U.S. Government catalog under NSN 5340-00-042-5495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.