S9413-041 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

S9413-041: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.099 INCHES MINIMUM AND 3.159 INCHES MAXIMUM IN, center_hole_diameter: 2.965 INCHES MINIMUM AND 3.013 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-166-1041, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

S9413-041

NSN: 5331-00-166-1041
FSC: 5331 — O-ring
CAGE: 9AA11 — GARRETT ENGINE DIV ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO (USA)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
temp_rating	-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	3.099 INCHES MINIMUM AND 3.159 INCHES MAXIMUM IN
center_hole_diameter	2.965 INCHES MINIMUM AND 3.013 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-166-1041

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 3.099 INCHES MINIMUM AND 3.159 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 2.965 INCHES MINIMUM AND 3.013 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	3.099 INCHES MINIMUM AND 3.159 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	2.965 INCHES MINIMUM AND 3.013 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 8

SAE-AMS7276Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

2-041V1226-75Reference document

Same NSN cross-reference

Reference document — Secondary reference

J221P041Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2-041V1164-75Reference document

Same NSN cross-reference

Reference document — Secondary reference

041 C0MP 19357Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

M83248/1-041Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy S9413-041?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is S9413-041?

S9413-041 is a O-RING.

What parts can replace S9413-041?

There are 8 known substitutes for S9413-041: SAE-AMS7276, 2-041V1226-75, J221P041 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for S9413-041?

S9413-041 is cataloged in the U.S. Government catalog under NSN 5331-00-166-1041. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

S9413-041 — O-RING

Request a Quote — S9413-041