PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S8PPFS104
S8PPFS104 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, bore_shape: STRAIGHT, bore_diameter: 0.7500 INCHES NOMINAL IN, overall_width: 0.4375 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-830-4282, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8PPFS104
NSN: 3110-00-830-4282
FSC: 3110
CAGE: 76050 — EATON AEROSPACE LLC DBA STERER ENGINEERING DIV M.C.AEROSPACE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
bore_shapeSTRAIGHT
bore_diameter0.7500 INCHES NOMINAL IN
overall_width0.4375 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter1.6250 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
NSN3110-00-830-4282
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S8PPFS104 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL INNER RING
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
BEARING SEAL TYPE: CONTACT
•
SEAL QUANTITY: 2
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL INNER RING
MATERIALRUBBER SYNTHETIC SEAL
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
BEARING SEAL TYPECONTACT
SEAL QUANTITY2
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
FF-B-2844Interchangeable
interchangeable cross-reference
interchangeable
3TAR17-24UInterchangeable
interchangeable cross-reference
interchangeable
5189342Interchangeable
interchangeable cross-reference
interchangeable
1-210761-3Interchangeable
interchangeable cross-reference
interchangeable
30111Interchangeable
interchangeable cross-reference
interchangeable
W5939092PC24Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S8PPFS104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8PPFS104?
S8PPFS104 is a BEARING,BALL,ANNULAR.
What parts can replace S8PPFS104?
There are 33 known substitutes for S8PPFS104: FF-B-2844, 3TAR17-24U, 5189342 and 30 more. Substitute compatibility should be verified for your specific system.
Is S8PPFS104 still available?
S8PPFS104 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8PPFS104

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026