The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1035 OVERALL, end_radius: 0.250 INCHES NOMINAL IN, fork_depth: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, hole_diameter: 0.187 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN, overall_width: 0.312 INCHES NOMINAL IN, shank_diameter: 0.428 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-041-9980, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
S43829535-12
NSN:5340-00-041-9980 FSC:5340 — Hardware, Commercial CAGE:00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
material
STEEL COMP 1035 OVERALL
end_radius
0.250 INCHES NOMINAL IN
fork_depth
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
hole_diameter
0.187 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
overall_width
0.312 INCHES NOMINAL IN
shank_diameter
0.428 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN
fork_span_width
0.141 INCHES NOMINAL IN
style_designator
CLEVIS
surface_treatment
CADMIUM OVERALL
fork_arm_thickness
0.085 INCHES NOMINAL IN
material_document_and_classification
FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-00-041-9980
COMPONENT DIAGRAM
KEY FEATURES
•
SHANK DIAMETER: 0.428 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.141 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.085 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER
0.428 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN
FORK SPAN WIDTH
0.141 INCHES NOMINAL IN
FORK ARM THICKNESS
0.085 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
END RADIUS
0.250 INCHES NOMINAL IN
STYLE DESIGNATOR
CLEVIS
MATERIAL DOCUMENT AND CLASSIFICATION
FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH
0.312 INCHES NOMINAL IN
SURFACE TREATMENT
CADMIUM OVERALL
TEST DATA DOCUMENT
81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S43829535-12?
S43829535-12 is a CLEVIS,ROD END.
What parts can replace S43829535-12?
There is 1 known substitute for S43829535-12: S4382935-12. Substitute compatibility should be verified for your specific system.
What is the NSN for S43829535-12?
S43829535-12 is cataloged in the U.S. Government catalog under NSN 5340-00-041-9980. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.