PartsTable
Technical Data Sheet
Download PDF

S4382935-12 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S4382935-12: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1035 OVERALL, end_radius: 0.250 INCHES NOMINAL IN, fork_depth: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, hole_diameter: 0.187 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN, overall_width: 0.312 INCHES NOMINAL IN, shank_diameter: 0.428 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-041-9980, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S4382935-12
NSN: 5340-00-041-9980
FSC: 5340 — Hardware, Commercial
CAGE: 88277 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 1035 OVERALL
end_radius0.250 INCHES NOMINAL IN
fork_depth0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
hole_diameter0.187 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
overall_width0.312 INCHES NOMINAL IN
shank_diameter0.428 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN
fork_span_width0.141 INCHES NOMINAL IN
style_designatorCLEVIS
surface_treatmentCADMIUM OVERALL
fork_arm_thickness0.085 INCHES NOMINAL IN
material_document_and_classificationFED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-041-9980
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S4382935-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.428 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.141 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.085 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.428 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN
FORK SPAN WIDTH0.141 INCHES NOMINAL IN
FORK ARM THICKNESS0.085 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
END RADIUS0.250 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.312 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
TEST DATA DOCUMENT81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
S43829535-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy S4382935-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S4382935-12?
S4382935-12 is a CLEVIS,ROD END.
What parts can replace S4382935-12?
There is 1 known substitute for S4382935-12: S43829535-12. Substitute compatibility should be verified for your specific system.
What is the NSN for S4382935-12?
S4382935-12 is cataloged in the U.S. Government catalog under NSN 5340-00-041-9980. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S4382935-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.