PartsTable
Technical Data Sheet
Download PDF

S40009-01 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S40009-01: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, center_hole_diameter: 0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, cross-sectional_height: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN, reference_number_differentiating_characteristics: POLYTETRAFLUOROETHYLENE COATED. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-499-5646, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S40009-01
NSN: 5331-00-499-5646
FSC: 5331 — O-ring
CAGE: 25583 — ACRON AVIATION, INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
center_hole_diameter0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
cross-sectional_height0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
reference_number_differentiating_characteristicsPOLYTETRAFLUOROETHYLENE COATED
NSN5331-00-499-5646
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S40009-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: POLYTETRAFLUOROETHYLENE COATED
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSPOLYTETRAFLUOROETHYLENE COATED
SUBSTITUTES & CROSS-REFERENCES 2
5-103N674-70Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
10117092Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy S40009-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S40009-01?
S40009-01 is a O-RING.
What parts can replace S40009-01?
There are 2 known substitutes for S40009-01: 5-103N674-70, 10117092. Substitute compatibility should be verified for your specific system.
What is the NSN for S40009-01?
S40009-01 is cataloged in the U.S. Government catalog under NSN 5331-00-499-5646. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S40009-01