PartsTable
Technical Data Sheet
Download PDF

10117092 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10117092: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, center_hole_diameter: 0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, cross-sectional_height: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN, reference_number_differentiating_characteristics: POLYTETRAFLUOROETHYLENE COATED. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-499-5646, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117092
NSN: 5331-00-499-5646
FSC: 5331 — O-ring
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
center_hole_diameter0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
cross-sectional_height0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
reference_number_differentiating_characteristicsPOLYTETRAFLUOROETHYLENE COATED
NSN5331-00-499-5646
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117092 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: POLYTETRAFLUOROETHYLENE COATED
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSPOLYTETRAFLUOROETHYLENE COATED
SUBSTITUTES & CROSS-REFERENCES 2
5-103N674-70Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
S40009-01Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10117092?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117092?
10117092 is a O-RING.
What parts can replace 10117092?
There are 2 known substitutes for 10117092: 5-103N674-70, S40009-01. Substitute compatibility should be verified for your specific system.
What is the NSN for 10117092?
10117092 is cataloged in the U.S. Government catalog under NSN 5331-00-499-5646. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117092