PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S3605G99STABILIZED
S3605G99STABILIZED ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, overall_width: 1.0000 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2417, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S3605G99STABILIZED
NSN: 3110-00-198-2417
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter25.00 MILLIMETERS NOMINAL MM
overall_width1.0000 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresHEAT STABILIZED AT 175 DEG C AND W/O GREASE PLUG; 2 STEEL SHIELDS DEGC
style_designatorNON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter62.00 MILLIMETERS NOMINAL MM
NSN3110-00-198-2417
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S3605G99STABILIZED · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOAD DIRECTION: RADIAL
•
SEAL QUANTITY: 2
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
SPECIAL FEATURESHEAT STABILIZED AT 175 DEG C AND W/O GREASE PLUG; 2 STEEL SHIELDS DEGC
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOAD DIRECTIONRADIAL
SEAL QUANTITY2
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
BEARING SEAL TYPECONTACT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
36015Interchangeable
interchangeable cross-reference
interchangeable
59610Interchangeable
interchangeable cross-reference
interchangeable
A36015Interchangeable
interchangeable cross-reference
interchangeable
W305PPC3FS50381AUS2Interchangeable
interchangeable cross-reference
interchangeable
6AX191Interchangeable
interchangeable cross-reference
interchangeable
36A283616P14Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S3605G99STABILIZED?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S3605G99STABILIZED?
S3605G99STABILIZED is a BEARING,BALL,ANNULAR.
What parts can replace S3605G99STABILIZED?
There are 27 known substitutes for S3605G99STABILIZED: 36015, 59610, A36015 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S3605G99STABILIZED?
S3605G99STABILIZED is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2417. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S3605G99STABILIZED

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026