PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 36015
36015 ✓ Verified by PartsTable
Iomega · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

<b>Protect your investment with Iomega Service Plans!</b><br>Assuring the availability of your Iomega StorCenter Network Storage devices is a critical part of your data protection strategy. Iomega has made selecting and obtaining the best level of support for the entire life of this product easy and affordable. Getting your sen/ice plan from Iomega assures dependable delivery of results and lowertotal cost of ownership ofyour Iomega network storage solution.

Iomega service is available 24x7 to protectyour network storage technology investment with fast, consistent and reliable technical and problem-solving expertise. Service plans foryour Network Storage devices are offered at different levels to best meet your needs. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-042-0960, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
36015
NSN: 5310-00-042-0960
FSC: 5310
CAGE: 35795 — LESLIE CONTROLS, INC. DBA LESLIE CONTROLS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OVERALL
bore_shapeSTRAIGHT
head_styleHEXAGON
head_height0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
thread_class2A A
bore_diameter25.00 MILLIMETERS NOMINAL MM
overall_width1.0000 INCHES NOMINAL IN
seal_quantity2
thread_length1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
fastener_length3.344 INCHES MINIMUM AND 3.406 INCHES MAXIMUM IN
NSN5310-00-042-0960
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 36015 · Iomega ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
S3605G99STABILIZEDInterchangeable
interchangeable cross-reference
interchangeable
S3605S542Interchangeable
interchangeable cross-reference
interchangeable
W305PPFS137STABILIZEDInterchangeable
interchangeable cross-reference
interchangeable
2A#4N2-3/STInterchangeable
interchangeable cross-reference
interchangeable
3048D35G01Interchangeable
interchangeable cross-reference
interchangeable
877D980G01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36015?
36015 is a ADAPTER,ELECTRICAL CONDUIT manufactured by Iomega.
What parts can replace 36015?
There are 16 known substitutes for 36015: S3605G99STABILIZED, S3605S542, W305PPFS137STABILIZED and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 36015?
36015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-042-0960. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026