PartsTable
Technical Data Sheet
PartsTable / MRO / RT10C2L101

RT10C2L101 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES, body_width: 0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN, body_height: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, body_length: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5905-00-764-1181, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ RT10C2L101
NSN: 5905-00-764-1181
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_styleRECTANGULAR W/MOUNTING HOLES
body_width0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
body_height0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
body_length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
overall_width0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
overall_height0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
overall_length0.515 INCHES MINIMUM AND 0.555 INCHES MAXIMUM IN
shaft_diameter0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
NSN5905-00-764-1181
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN RT10C2L101 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
SHAFT DIAMETER: 0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
BODY HEIGHT: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MOUNTING HOLE DIAMETER: 0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
BODY WIDTH: 0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
•
ELECTRICAL RESISTANCE PER SECTION: 100.0 OHMS SINGLE SECTION
•
POWER DISSIPATION RATING PER SECTION IN WATTS: 0.75 FREE AIR SINGLE SECTION
•
TEST DATA DOCUMENT: 81349-MIL-R-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
SPECIFICATION/STANDARD DATA: 81349-MIL-R-27208/2 GOVERNMENT SPECIFICATION
TECHNICAL CHARACTERISTICS
SHAFT DIAMETER0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
BODY HEIGHT0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MOUNTING HOLE DIAMETER0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
BODY WIDTH0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
ELECTRICAL RESISTANCE PER SECTION100.0 OHMS SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS0.75 FREE AIR SINGLE SECTION
TEST DATA DOCUMENT81349-MIL-R-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA81349-MIL-R-27208/2 GOVERNMENT SPECIFICATION
TERMINAL LOCATIONREAR END LOCATION NOT OTHERWISE SPECIFIED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
RT10C2L102InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
DMS 85017BInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MILR27208InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
220L1+103InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
RT10C2L203InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MILR27208-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy RT10C2L101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RT10C2L101?
RT10C2L101 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace RT10C2L101?
There are 17 known substitutes for RT10C2L101: RT10C2L102, DMS 85017B, MILR27208 and 14 more. Substitute compatibility should be verified for your specific system.
Is RT10C2L101 still available?
RT10C2L101 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RT10C2L101

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026