PartsTable
Technical Data Sheet
PartsTable / COMPONENT / RI-3216SSRDA1
RI-3216SSRDA1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 1.0000 INCHES NOMINAL IN, overall_width: 0.5000 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-540-4662, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RI-3216SSRDA1
NSN: 3110-00-540-4662
FSC: 3110
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter1.0000 INCHES NOMINAL IN
overall_width0.5000 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter2.0000 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-540-4662
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: RI-3216SSRDA1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL: GREASE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.5000 INCHES NOMINAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
FF-B-2844Interchangeable
interchangeable cross-reference
interchangeable
3TAR17-24UInterchangeable
interchangeable cross-reference
interchangeable
5189342Interchangeable
interchangeable cross-reference
interchangeable
8121Interchangeable
interchangeable cross-reference
interchangeable
CR-141Interchangeable
interchangeable cross-reference
interchangeable
SS-7208HInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy RI-3216SSRDA1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RI-3216SSRDA1?
RI-3216SSRDA1 is a BEARING,BALL,ANNULAR.
What parts can replace RI-3216SSRDA1?
There are 34 known substitutes for RI-3216SSRDA1: FF-B-2844, 3TAR17-24U, 5189342 and 31 more. Substitute compatibility should be verified for your specific system.
Is RI-3216SSRDA1 still available?
RI-3216SSRDA1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RI-3216SSRDA1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026