RH10-1 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

RH10-1: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: RUBBER SYNTHETIC, unit_type: DIAL INDICATING, body_width: 0.438 INCHES NOMINAL IN, blade_width: 8.7 MILLIMETERS NOMINAL MM, body_height: 0.406 INCHES NOMINAL IN, body_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-211-1318, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RH10-1

NSN: 5905-00-211-1318
NIINs: 002111318, 014581834, 015330287, 015834223
FSC: 5905 — Resistor
CAGE: 91637 — VISHAY DALE ELECTRONICS, LLC DIV VISHAY AMERICAS (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC
unit_type	DIAL INDICATING
body_width	0.438 INCHES NOMINAL IN
blade_width	8.7 MILLIMETERS NOMINAL MM
body_height	0.406 INCHES NOMINAL IN
body_length	0.750 INCHES NOMINAL IN
overall_width	1.570 INCHES NOMINAL IN
terminal_type	TAB, SOLDER LUG
inclosure_type	ENCASED
overall_height	5.900 INCHES NOMINAL IN
overall_length	2.950 INCHES NOMINAL IN
size_designator	EXTRA LARGE
NSN	5905-00-211-1318

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -50.0 TO 50.0

•

ELECTRICAL RESISTANCE: 1.000 OHMS

•

INCLOSURE TYPE: ENCASED

•

MOUNTING HOLE SIZE: 0.094 INCHES NOMINAL IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 0.562 INCHES NOMINAL IN

•

TERMINAL LENGTH: 0.312 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-50.0 TO 50.0
ELECTRICAL RESISTANCE	1.000 OHMS
INCLOSURE TYPE	ENCASED
MOUNTING HOLE SIZE	0.094 INCHES NOMINAL IN
TERMINAL TYPE	TAB, SOLDER LUG
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	0.562 INCHES NOMINAL IN
TERMINAL LENGTH	0.312 INCHES NOMINAL IN
BODY WIDTH	0.438 INCHES NOMINAL IN
BODY HEIGHT	0.406 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 9

RH-10-1OHM+/-1%Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

63E602Reference document

Same NSN cross-reference

Reference document — Secondary reference

RH10-1R0FReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RH-10-1OHM-1PCTReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RH10-.1 0HMReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RE65G1R100Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy RH10-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RH10-1?

RH10-1 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace RH10-1?

There are 9 known substitutes for RH10-1: RH-10-1OHM+/-1%, 63E602, RH10-1R0F and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for RH10-1?

RH10-1 is cataloged in the U.S. Government catalog under NSN 5905-00-211-1318. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RH10-1 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — RH10-1