RE65G1R100 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

RE65G1R100: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_width: 0.438 INCHES NOMINAL IN, body_height: 0.406 INCHES NOMINAL IN, body_length: 0.750 INCHES NOMINAL IN, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCASED, terminal_length: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-211-1318, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RE65G1R100

NSN: 5905-00-211-1318
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_width	0.438 INCHES NOMINAL IN
body_height	0.406 INCHES NOMINAL IN
body_length	0.750 INCHES NOMINAL IN
terminal_type	TAB, SOLDER LUG
inclosure_type	ENCASED
terminal_length	0.312 INCHES NOMINAL IN
style_designator	AXIAL TERMINAL (S)
mounting_hole_size	0.094 INCHES NOMINAL IN
electrical_resistance	1.000 OHMS
reliability_indicator	ESTABLISHED
reactance_characteristic	INDUCTIVE
specification/standard_data	81349-MIL-R-39009/1 GOVERNMENT SPECIFICATION
NSN	5905-00-211-1318

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -50.0 TO 50.0

•

ELECTRICAL RESISTANCE: 1.000 OHMS

•

INCLOSURE TYPE: ENCASED

•

MOUNTING HOLE SIZE: 0.094 INCHES NOMINAL IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 0.562 INCHES NOMINAL IN

•

TERMINAL LENGTH: 0.312 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-50.0 TO 50.0
ELECTRICAL RESISTANCE	1.000 OHMS
INCLOSURE TYPE	ENCASED
MOUNTING HOLE SIZE	0.094 INCHES NOMINAL IN
TERMINAL TYPE	TAB, SOLDER LUG
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	0.562 INCHES NOMINAL IN
TERMINAL LENGTH	0.312 INCHES NOMINAL IN
BODY WIDTH	0.438 INCHES NOMINAL IN
BODY HEIGHT	0.406 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 9

RH-10-1OHM+/-1%Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

63E602Reference document

Same NSN cross-reference

Reference document — Secondary reference

RH10-1R0FReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RH-10-1OHM-1PCTReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RH10-.1 0HMReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RH10-1Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy RE65G1R100?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RE65G1R100?

RE65G1R100 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace RE65G1R100?

There are 9 known substitutes for RE65G1R100: RH-10-1OHM+/-1%, 63E602, RH10-1R0F and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for RE65G1R100?

RE65G1R100 is cataloged in the U.S. Government catalog under NSN 5905-00-211-1318. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RE65G1R100 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — RE65G1R100