PartsTable
Technical Data Sheet
PartsTable / COMPONENT / RD-4-5952-1P
RD-4-5952-1P ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_width: 1.500 INCHES NOMINAL IN, first_leg_length: 7.000 INCHES NOMINAL IN, style_designator: ANGLE, second_leg_length: 4.000 INCHES NOMINAL IN, end_item_identification: 2320013719583, TRUCK UTILITY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-525-9799, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RD-4-5952-1P
NSN: 5340-01-525-9799
FSC: 5340
CAGE: 62534 — RED DOT CORPORATION DBA RED DOT CORP (USA)
SPECIFICATIONS
first_leg_width1.500 INCHES NOMINAL IN
first_leg_length7.000 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length4.000 INCHES NOMINAL IN
end_item_identification2320013719583, TRUCK UTILITY
NSN5340-01-525-9799
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RD-4-5952-1P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG LENGTH: 7.000 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 4.000 INCHES NOMINAL IN
•
FIRST LEG WIDTH: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORANGLE
FIRST LEG LENGTH7.000 INCHES NOMINAL IN
SECOND LEG LENGTH4.000 INCHES NOMINAL IN
END ITEM IDENTIFICATION2320013719583, TRUCK UTILITY
FIRST LEG WIDTH1.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
201FFANG5Interchangeable
interchangeable cross-reference
interchangeable
22-1646Interchangeable
interchangeable cross-reference
interchangeable
106654Interchangeable
interchangeable cross-reference
interchangeable
RD-4-5952Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RD-4-5952-1P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RD-4-5952-1P?
RD-4-5952-1P is a BRACKET,ANGLE.
What parts can replace RD-4-5952-1P?
There are 4 known substitutes for RD-4-5952-1P: 201FFANG5, 22-1646, 106654 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RD-4-5952-1P?
RD-4-5952-1P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-525-9799. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RD-4-5952-1P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026