PartsTable
Technical Data Sheet
106654 ✓ Verified by PartsTable
Hama · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Classic on-ear stereo headset<br>- Call management unit for answering calls, for volume control and voice dial activation (depends on the phone model) as separate component (with 3.5 mm jack)<br>- Allows optional use of conventional headphones thanks to two separate components (headphone part and mobile phone specific part)<br>- Built-in microphone<br>- Integrated cable clip for individual attachment of the microphone/call management unit<br>- Extension cable for use with hifi systems, etc. included<br>- Flight adapter for use in planes included. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8883, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
106654
NSN: 3110-00-144-8883
FSC: 3110
CAGE: 71790 — CURTISS-WRIGHT CORP AIRPLANE DIV (USA)
SPECIFICATIONS
thread_directionRIGHT-HAND
end_item_identification3805-01-537-7952;DITCHING MACHINE RT40
nominal_thread_diameter0.190 INCHES IN
part_name_assigned_by_controlling_agencySCREW,M10
NSN3110-00-144-8883
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 106654 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
BORE SHAPE: STRAIGHT
SHIELD QUANTITY: 2
LUBRICATION MATERIAL: GREASE
SURFACE FINISH: GROUND
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-3545 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
SHIELD QUANTITY2
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3545 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL SHIELD
MATERIALSTEEL OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
222031Interchangeable
interchangeable cross-reference
interchangeable
304083C1Interchangeable
interchangeable cross-reference
interchangeable
38088Interchangeable
interchangeable cross-reference
interchangeable
201SFFQ571Interchangeable
interchangeable cross-reference
interchangeable
JH12A201ANG3Interchangeable
interchangeable cross-reference
interchangeable
127212Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 106654?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 106654?
106654 is a BEARING,BALL,ANNULAR manufactured by Hama.
What parts can replace 106654?
There are 23 known substitutes for 106654: 222031, 304083C1, 38088 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 106654?
106654 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 106654