PartsTable
Technical Data Sheet
Download PDF

R929-1 — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

R929-1: RESISTOR,FIXED,WIRE WOUND.

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, body_length: 1.000 INCHES NOMINAL IN, body_diameter: 0.437 INCHES NOMINAL IN, bore_diameter: 16.00 MILLIMETERS NOMINAL MM, overall_width: 11.0 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-198-0326, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ R929-1
NSN: 3110-00-198-0326
NIINs: 001980326, 009035173
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 18797 — DUMORE CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
body_length1.000 INCHES NOMINAL IN
body_diameter0.437 INCHES NOMINAL IN
bore_diameter16.00 MILLIMETERS NOMINAL MM
overall_width11.0 MILLIMETERS NOMINAL MM
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
load_directionRADIAL
surface_finishGROUND
shield_quantity1
special_featuresNOISE TESTED AND SELECTED ALSO SHIELD PROCESSED
NSN3110-00-198-0326
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R929-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: TIGHT
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 38.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONTIGHT
SURFACE FINISHGROUND
SHIELD QUANTITY1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH11.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER38.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESNOISE TESTED AND SELECTED ALSO SHIELD PROCESSED
SUBSTITUTES & CROSS-REFERENCES 3
RM103KE4929Reference document
Same NSN cross-reference
Reference document — Secondary reference
7502BT3122U-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
7502B16T3122Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy R929-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R929-1?
R929-1 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace R929-1?
There are 3 known substitutes for R929-1: RM103KE4929, 7502BT3122U-9, 7502B16T3122. Substitute compatibility should be verified for your specific system.
What is the NSN for R929-1?
R929-1 is cataloged in the U.S. Government catalog under NSN 3110-00-198-0326. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R929-1