PartsTable
Technical Data Sheet
Download PDF

RM103KE4929 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

RM103KE4929: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 16.00 MILLIMETERS NOMINAL MM, overall_width: 11.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-198-0326, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RM103KE4929
NSN: 3110-00-198-0326
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter16.00 MILLIMETERS NOMINAL MM
overall_width11.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
special_featuresNOISE TESTED AND SELECTED ALSO SHIELD PROCESSED
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter38.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationTIGHT
retainer_fabrication_methodPRESSED
NSN3110-00-198-0326
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: RM103KE4929 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: TIGHT
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 38.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONTIGHT
SURFACE FINISHGROUND
SHIELD QUANTITY1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH11.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER38.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESNOISE TESTED AND SELECTED ALSO SHIELD PROCESSED
SUBSTITUTES & CROSS-REFERENCES 2
7502BT3122U-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
7502B16T3122Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy RM103KE4929?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RM103KE4929?
RM103KE4929 is a BEARING,BALL,ANNULAR.
What parts can replace RM103KE4929?
There are 2 known substitutes for RM103KE4929: 7502BT3122U-9, 7502B16T3122. Substitute compatibility should be verified for your specific system.
What is the NSN for RM103KE4929?
RM103KE4929 is cataloged in the U.S. Government catalog under NSN 3110-00-198-0326. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RM103KE4929