PartsTable
Technical Data Sheet
Download PDF

R232132-8 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

R232132-8: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, housing_bore_diameter: 2.499 INCHES MINIMUM AND 2.501 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-286-6859, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R232132-8
NSN: 5330-00-286-6859
FSC: 5330 — Packing and Gasket Materials
CAGE: 79793 — WOLVERINE MOTOR WORKS INC (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
housing_bore_diameter2.499 INCHES MINIMUM AND 2.501 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1600 FEET PER MINUTE FT
NSN5330-00-286-6859
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R232132-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 2.499 INCHES MINIMUM AND 2.501 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.500 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER2.499 INCHES MINIMUM AND 2.501 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SUBSTITUTES & CROSS-REFERENCES 8
314301AReference document
Same NSN cross-reference
Reference document — Secondary reference
116250Reference document
Same NSN cross-reference
Reference document — Secondary reference
84214Reference document
Same NSN cross-reference
Reference document — Secondary reference
048730Reference document
Same NSN cross-reference
Reference document — Secondary reference
12201Reference document
Same NSN cross-reference
Reference document — Secondary reference
43-158Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy R232132-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R232132-8?
R232132-8 is a SEAL,PLAIN ENCASED.
What parts can replace R232132-8?
There are 8 known substitutes for R232132-8: 314301A, 116250, 84214 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R232132-8?
R232132-8 is cataloged in the U.S. Government catalog under NSN 5330-00-286-6859. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R232132-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.