PartsTable
Technical Data Sheet
Download PDF

116250 — BEARING,SLEEVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

116250: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include height: 0.531 INCHES NOMINAL IN, material: COPPER ALLOY AND STEEL METALLIC PARTS, base_width: 0.500 INCHES NOMINAL IN, end_length: 0.312 INCHES NOMINAL IN, base_length: 0.500 INCHES NOMINAL IN, button_width: 0.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-286-6859, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
116250
NSN: 5330-00-286-6859
NIINs: 002866859, 003544126, 008169276
FSC: 5330 — Packing and Gasket Materials
CAGE: 76292 — MICHIGAN LEATHER PRODUCTS CO (USA)
SPECIFICATIONS
height0.531 INCHES NOMINAL IN
materialCOPPER ALLOY AND STEEL METALLIC PARTS
base_width0.500 INCHES NOMINAL IN
end_length0.312 INCHES NOMINAL IN
base_length0.500 INCHES NOMINAL IN
button_width0.438 INCHES NOMINAL IN
button_thickness0.312 INCHES NOMINAL IN
surface_treatmentNICKEL OVERALL
fabrication_methodSTAMPED
turnbutton_stud_styleMACHINE SCREW
socket_accommodated_quantity1
thread_size_and_series/type_designator0.164-32 UNIFIED NATIONAL COARSE (UNC)
NSN5330-00-286-6859
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 116250 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 2.499 INCHES MINIMUM AND 2.501 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.500 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER2.499 INCHES MINIMUM AND 2.501 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SUBSTITUTES & CROSS-REFERENCES 8
314301AReference document
Same NSN cross-reference
Reference document — Secondary reference
84214Reference document
Same NSN cross-reference
Reference document — Secondary reference
048730Reference document
Same NSN cross-reference
Reference document — Secondary reference
12201Reference document
Same NSN cross-reference
Reference document — Secondary reference
R232132-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
43-158Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 116250?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 116250?
116250 is a BEARING,SLEEVE.
What parts can replace 116250?
There are 8 known substitutes for 116250: 314301A, 84214, 048730 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 116250?
116250 is cataloged in the U.S. Government catalog under NSN 5330-00-286-6859. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 116250

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.