PartsTable
Technical Data Sheet
Download PDF

PRP150-7377 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PRP150-7377: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN, center_hole_diameter: 2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-207-0115, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PRP150-7377
NSN: 5331-01-207-0115
FSC: 5331 — O-ring
CAGE: K1980 — PETARDS JOYCE-LOEBL LTD (GBR)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN
center_hole_diameter2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-01-207-0115
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PRP150-7377 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 9
0150114Reference document
Same NSN cross-reference
Reference document — Secondary reference
150-7377Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS28775-150Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-150 N304-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
PRP568-150-4067-70Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
D25-150Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy PRP150-7377?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PRP150-7377?
PRP150-7377 is a O-RING.
What parts can replace PRP150-7377?
There are 9 known substitutes for PRP150-7377: 0150114, 150-7377, MS28775-150 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PRP150-7377?
PRP150-7377 is cataloged in the U.S. Government catalog under NSN 5331-01-207-0115. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PRP150-7377