PartsTable
Technical Data Sheet
PartsTable / O-RING / 0150114
0150114 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN, center_hole_diameter: 2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-207-0115, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0150114
NSN: 5331-01-207-0115
FSC: 5331 — O-RING
CAGE: 64849 — RINEER HYDRAULICS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN
center_hole_diameter2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-01-207-0115
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0150114 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER3.040 INCHES MINIMUM AND 3.096 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.847 INCHES MINIMUM AND 2.877 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
2420060Interchangeable
interchangeable cross-reference
interchangeable
1507377Interchangeable
interchangeable cross-reference
interchangeable
15-07377UNInterchangeable
interchangeable cross-reference
interchangeable
402130Interchangeable
interchangeable cross-reference
interchangeable
422372-1Interchangeable
interchangeable cross-reference
interchangeable
PRP150-7377Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0150114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0150114?
0150114 is a O-RING.
What parts can replace 0150114?
There are 13 known substitutes for 0150114: 2420060, 1507377, 15-07377UN and 10 more. Substitute compatibility should be verified for your specific system.
Is 0150114 still available?
0150114 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0150114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026