PartsTable
Technical Data Sheet
Download PDF

PR-317 — PUSH ROD,ENGINE POPPET VALVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PR-317: PUSH ROD,ENGINE POPPET VALVE.

The PUSH ROD,ENGINE POPPET VALVE is a the manufacturer industrial component. Key specifications include material: STEEL, body_type: TUBULAR, end_length: 0.219 INCHES NOMINAL BOTH ENDS IN, overall_length: 9.750 INCHES NOMINAL IN, outside_diameter: 0.575 INCHES MINIMUM AND 0.611 INCHES MAXIMUM IN, style_designator: BALL BOTH ENDS. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-239-8397, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PR-317
NSN: 5330-00-239-8397
NIINs: 002398397, 007587856
FSC: 5330 — Packing and Gasket Materials
CAGE: 30760 — INGERSOLL RAND CO (USA)
SPECIFICATIONS
materialSTEEL
body_typeTUBULAR
end_length0.219 INCHES NOMINAL BOTH ENDS IN
overall_length9.750 INCHES NOMINAL IN
outside_diameter0.575 INCHES MINIMUM AND 0.611 INCHES MAXIMUM IN
style_designatorBALL BOTH ENDS
aperture_diameter0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
end_largest_diameter0.313 INCHES NOMINAL BOTH ENDS IN
end_spherical_radius0.313 INCHES NOMINAL BOTH ENDS IN
body_outside_diameter0.313 INCHES NOMINAL IN
cross-sectional_thickness0.156 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-239-8397
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PR-317 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.156 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 0.575 INCHES MINIMUM AND 0.611 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
MATERIAL: LEATHER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.156 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER0.575 INCHES MINIMUM AND 0.611 INCHES MAXIMUM IN
APERTURE DIAMETER0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIALLEATHER OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
P1768Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PR-317?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PR-317?
PR-317 is a PUSH ROD,ENGINE POPPET VALVE.
What parts can replace PR-317?
There is 1 known substitute for PR-317: P1768. Substitute compatibility should be verified for your specific system.
What is the NSN for PR-317?
PR-317 is cataloged in the U.S. Government catalog under NSN 5330-00-239-8397. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PR-317