PartsTable
Technical Data Sheet
Download PDF

P1768 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

P1768: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: LEATHER OVERALL, outside_diameter: 0.575 INCHES MINIMUM AND 0.611 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, cross-sectional_thickness: 0.156 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-239-8397, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P1768
NSN: 5330-00-239-8397
FSC: 5330 — Packing and Gasket Materials
CAGE: 73267 — PARKER MACHINE WORKS (USA)
SPECIFICATIONS
materialLEATHER OVERALL
outside_diameter0.575 INCHES MINIMUM AND 0.611 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
cross-sectional_thickness0.156 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-239-8397
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P1768 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.156 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 0.575 INCHES MINIMUM AND 0.611 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
MATERIAL: LEATHER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.156 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER0.575 INCHES MINIMUM AND 0.611 INCHES MAXIMUM IN
APERTURE DIAMETER0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIALLEATHER OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
PR3-17Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy P1768?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P1768?
P1768 is a GASKET.
What parts can replace P1768?
There is 1 known substitute for P1768: PR3-17. Substitute compatibility should be verified for your specific system.
What is the NSN for P1768?
P1768 is cataloged in the U.S. Government catalog under NSN 5330-00-239-8397. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P1768