PartsTable
Technical Data Sheet
PartsTable / O-RING / PL7N-3 ITEM 92
PL7N-3 ITEM 92 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN, cross-sectional_height: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-853-2379, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PL7N-3 ITEM 92
NSN: 5331-00-853-2379
FSC: 5331 — O-RING
CAGE: 83130 — AIR & LIQUID SYSTEMS CORPORATION DBA BUFFALO PUMPS (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
cross-sectional_height0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
NSN5331-00-853-2379
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PL7N-3 ITEM 92 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
A26096AInterchangeable
interchangeable cross-reference
interchangeable
26096Interchangeable
interchangeable cross-reference
interchangeable
2-906-N674-70Interchangeable
interchangeable cross-reference
interchangeable
5331PL1284848Interchangeable
interchangeable cross-reference
interchangeable
AMS7259DInterchangeable
interchangeable cross-reference
interchangeable
106736Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PL7N-3 ITEM 92?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PL7N-3 ITEM 92?
PL7N-3 ITEM 92 is a O-RING.
What parts can replace PL7N-3 ITEM 92?
There are 32 known substitutes for PL7N-3 ITEM 92: A26096A, 26096, 2-906-N674-70 and 29 more. Substitute compatibility should be verified for your specific system.
Is PL7N-3 ITEM 92 still available?
PL7N-3 ITEM 92 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PL7N-3 ITEM 92

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026