PartsTable
Technical Data Sheet
5331PL1284848 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, center_hole_diameter: 0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN, cross-sectional_height: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1981, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL1284848
NSN: 5331-00-165-1981
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
center_hole_diameter0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
cross-sectional_height0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
NSN5331-00-165-1981
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL1284848 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
AS568-906Interchangeable
interchangeable cross-reference
interchangeable
S0455 3-906Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-906Interchangeable
interchangeable cross-reference
interchangeable
3096Interchangeable
interchangeable cross-reference
interchangeable
3906Interchangeable
interchangeable cross-reference
interchangeable
92062Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL1284848?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL1284848?
5331PL1284848 is a O-RING.
What parts can replace 5331PL1284848?
There are 27 known substitutes for 5331PL1284848: AS568-906, S0455 3-906, M83248/2-906 and 24 more. Substitute compatibility should be verified for your specific system.
Is 5331PL1284848 still available?
5331PL1284848 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL1284848